Anime Mysterious Tier List (UPD0.5): Unit Rankings & Team Tests

Check the dated UPD0.5 Anime Mysterious unit-ranking snapshot, then use a repeatable team test before replacing a roster slot after an update.

Page last updated

Anime Mysterious Tier List: What to Do With UPD0.5 Evidence

Direct answer: there is no verified official, live Anime Mysterious tier table to copy blindly. The most specific dated editorial evidence used on this page is Pro Game Guides' October 10, 2026 UPD0.5 list: it named Ryu, Yuto (Pure Love), Spood (Yen), Sukuno (Mohoraga), and Fammy in its S tier. Use those names as candidates for the missing job in your team, then verify their visible cost, role, upgrade behavior, and stage result in the server you are playing today.

The game itself is currently labelled UPD0.5 on the official Anime Mysterious Roblox experience, checked October 16, 2026. The official description says players summon anime units, build a strategy, and defend against waves. It directs updates, feedback, and issue reports to the creator's official Roblox Community. That establishes the game and its first-party update route; it does not establish a developer-issued ranking of individual units.

Official Anime Mysterious Roblox experience artwork

Screenshot source: official Anime Mysterious Roblox experience listing, retrieved October 16, 2026. It verifies the experience identity and the UPD0.5 listing label, not unit stats, tier placements, or banner odds.

Use This Page for the Ranking Question

This is the one page for the player asking, “Which units does a dated source rank, and what should I do next?” It keeps the named placements, their date, and the decision caveat together. It is deliberately different from how a tier list works, which explains the testing method and how version changes invalidate a conclusion. It is also different from the Tier List Guides hub, which is only a route to related guides, not a competing table.

Your questionRead or do this next
“Who did the dated UPD0.5 source put at the top?”Read the reported snapshot below.
“Should I replace a unit before my next run?”Diagnose the roster gap, then make one controlled change.
“Did an update make this table stale?”Check the official Roblox listing and Community first, then use the recheck guide.
“I am new and do not know which role is missing.”Start with the beginner unit guide and unit roles guide.

Do not use the words “wiki” or “Discord” as a substitute for evidence. This page does not claim an official Discord invite because the checked official Roblox listing directs players to the Roblox Community. If a community message, a video, or a friend gives a different tier order, record its date and compare it against the live game rather than silently replacing the dated source below.

Version, Evidence, and What Is Current

The distinction between current game state and current editorial evidence matters. On October 16, the official listing was still labelled UPD0.5. That is the current first-party status signal available here. Pro Game Guides updated its ranking on October 10 and explicitly called its rankings early; its writer says the list may change as unit stats, abilities, and performance across modes become clearer. A later Update 0.5 report dated October 13 describes new Fate content and systems, but it is not a developer tier table either.

EvidenceDate checked or publishedSafe use
Official Roblox experience and Community routeChecked October 16Confirm the game identity, UPD0.5 label, and first-party update/feedback destination.
Pro Game Guides editorial tier listUpdated October 10Identify the source's S/A/B candidates and its stated evaluation criteria.
Update 0.5 reportUpdated October 13Notice that new content and systems can change what a roster needs; verify details in-game.
Your own runToday, with a recorded mode and waveDecide whether one unit actually improves your next attempt.

That hierarchy is intentional. A release label does not reveal damage numbers. An editorial tier label does not guarantee a summon rate, a cost, a passive, a mode match, or a future balance result. A video can show the interface and team flow, but it can also be recorded before a patch. Your live screen is the authority for changing values; the dated sources tell you where to begin testing.

Reported UPD0.5 Unit Snapshot

The following table transcribes the October 10 Pro Game Guides snapshot. “Reported” is important: S, A, and B are that editor's categories, not developer labels and not an evergreen current table maintained by this site. The source says it considers damage, defensive value, economy benefits, and overall utility. This is why a player should not convert a letter tier into a rule such as “sell every B unit” or “only summon an S unit.”

Reported source tierUnits named in the October 10 UPD0.5 editorial snapshotPlayer-safe interpretation
SRyu; Yuto (Pure Love); Spood (Yen); Sukuno (Mohoraga); FammyCandidates worth checking when a role is missing; not automatic replacements for a working team.
ATojo (Awakened); JoGo (Six-Eye); Elforia (Awakening); Bory (Awakened); Tanzaburo; Free; YamachoStrong reported alternatives when they solve the immediate wave, coverage, or utility problem.
BSchool Girl; Itacho (Susanoo); Last Heir (Awakened)Usable reported options; compare their actual job and investment cost before benching them.

The source's own wording is useful for a newcomer: an S tier can include damage, support, and economy options. That means Spood (Yen) appearing beside combat names does not prove it wins the same combat test. It indicates that economy can have team value. Conversely, a hard-hitting unit can be the wrong next investment if your run fails because you cannot fund upgrades, cover a lane, or survive a timing window.

Turn a Tier Letter Into One Team Decision

Start with a sentence that names the failure, not the unit you hope to pull. Examples: “I cannot stabilize the early waves,” “my main damage stalls on a boss,” “I am late on upgrades,” or “my team has damage but no useful coverage.” Then pick one available candidate whose reported purpose could address that failure. Do not change traits, equipment, placement, and three units at once; a clean result needs one meaningful variable.

If your next run fails because…First decisionWhat to record
Early waves overwhelm the laneKeep your reliable starter and test one candidate in the same placement window.Stage, wave, starting resources, placement time, and whether the first leak moves later.
A boss or late group survives too longCompare one damage candidate at the same upgrade point.Wave, target behavior, upgrade level, remaining enemies, and clear/fail result.
Upgrades arrive too lateTest whether an economy-oriented slot changes the upgrade timing without breaking defense.Resources before each key upgrade and the resulting wave outcome.
You have damage but inconsistent control or coverageReplace only one overlapping damage slot with a unit that changes the observed gap.Map section, target pattern, coverage, and whether the route becomes repeatable.

For a new account, the best “tier list decision” is often not to chase the top row. A beginner with a viable team should spend the next run learning which job is actually absent. The best beginner team guide gives a role-first route, while economy versus DPS helps frame the resource trade-off. Those internal links are practical because the source list itself is not a complete build guide.

A Short Controlled Test You Can Repeat

  1. Open the official Roblox experience and make sure the version label and game mode match your notes.
  2. Choose one route that you can replay. Keep your team, upgrades, and placement order unchanged except for one unit.
  3. Write down the exact problem before the run: early leak, boss pressure, slow upgrade timing, or inadequate coverage.
  4. Test the candidate in the same role and compare one visible outcome, such as the first failed wave or the resource timing for a key upgrade.
  5. Repeat once if the result could have been caused by a mistake, random target selection, or a different teammate.
  6. Date the observation. If the game label, banner, or official Community announcement changes, retest instead of carrying the old result forward.

This procedure is more useful than a huge unverified table because it produces a decision you can reverse. If the candidate does not improve the same route, keep your resources and try a different role hypothesis. Read how to use a dated tier list for the rationale and a longer evidence checklist.

Gameplay Context: Watch, Then Verify In-Game

The video below is a real, game-specific unit-ranking and team-composition walkthrough. It is included to help players recognize the gameplay loop and the kinds of role trade-offs that a tier list is trying to summarize. Its claims are not incorporated into the table above, and it must not override the official Roblox/Community route or a live test after a patch.

Video source: “ANIME MYSTERIOUS UNITS TIER LIST (RANKING ALL BEST UNITS) | ROBLOX ANIME MYSTERIOUS”. The embedded footage is useful as a verifiable gameplay screenshot/video reference for units, deployment, and roster discussion; check the upload date and live game before treating any shown value as current.

What to Watch After an Update

Watch the official Roblox experience and the linked official Community for a changed version label, developer notice, event, balance message, or new unit. A change does not automatically make every placement false, but it does remove the reason to call an old table current. When you see a change, preserve the old page as dated context and use the ranking recheck guide to collect a new source or run a same-condition comparison.

The October 13 Update 0.5 report is a good example of why version scope matters: it describes additional Fate-related content and quality-of-life changes after the October 10 editorial ranking. That is a signal to inspect your actual roster and mode, not permission to invent a new tier order. Only a dated source or a reproducible in-game test can support a placement change on this page.

Evidence Notes for the Main Roles

The reported names are easier to use when they are translated into decisions rather than memorized as a winner list. A damage candidate should be tested against the wave or boss that currently survives. A support or control candidate should be tested where timing, range, target behavior, or lane coverage is the reason a run fails. An economy candidate should be tested by the upgrade it enables, not by whether its attack number looks impressive. These are practical hypotheses, not unverified unit-stat claims.

Before a summon or evolution, write a short roster note: “I already have reliable damage,” “I cannot fund the second upgrade,” or “my lane leaks when targets split.” Then choose the candidate whose reported role is closest to that note. If two candidates appear in the same source tier, compare the role gap and investment cost before comparing rarity. This keeps a high-level editorial snapshot connected to the real decision a player has to make.

For a beginner, a balanced test team often needs four questions answered: who starts the wave, who supplies the main damage, who covers a weakness, and who pays for upgrades. The answers may be four separate units or fewer units with more than one job. A tier letter cannot answer those questions by itself. The useful outcome of this page is a dated, reversible next action: keep the current unit, change one slot, observe the same wave, and keep the result only if it improves consistency.

When you record a screenshot, include the visible version label, the unit's level or upgrade state, and the wave result in the same note. That evidence is more useful than a cropped damage number because it preserves context. If a future update changes the label or the unit's menu, you can tell exactly which observation must be repeated.

Build a Tier List for Your Own Roster in Two Passes

The reported table answers only one narrow question: which names did a dated editor place in each letter group? A useful live roster decision needs a second pass. First use the snapshot to make a small candidate list from units you already own. Then compare those candidates against the one job your team is failing to do. This prevents a player from spending resources on an attractive letter grade while leaving the actual failure untouched.

Pass One: Make a Candidate List Without Inventing Stats

Open the current unit screen and write down the unit names you actually have. Next to each name, note only facts visible in your own game: the mode you are about to play, the unit's current upgrade state, and the job you expect it to perform. Do not fill a blank with a number from an old video, a comment, or an undated table. The official Roblox listing confirms that Anime Mysterious is a strategy-and-wave-defense experience, but it does not publish a permanent stat sheet or official letter tiers. A unit name appearing in the October 10 editorial snapshot is a reason to test it, not a reason to claim a current damage value or placement rule.

Use this short filter before changing your lineup:

CheckKeep the candidate when...Stop and recheck when...
VersionThe listing and your server still match the UPD0.5 context recorded above.A changed label, banner, or official Community notice suggests that the old test conditions may no longer apply.
AvailabilityYou already own the unit or can inspect it without committing a scarce resource.The plan assumes a summon, evolution, cost, or requirement that is not visible in your live client.
Team jobThe candidate has a clear job in your test: early stability, boss damage, economy timing, or coverage.You are replacing a unit only because its letter grade looks lower.
Test routeYou can replay the same route with the same teammates, order, and upgrade choices.A different map, random event, or teammate behavior would make two runs incomparable.

This is also the right point to separate a reported rank from a personal test rank. A reported rank is the dated editor's ordering. A personal test rank is your note that one owned unit improved or failed to improve one named route under recorded conditions. Keeping those labels separate makes an update audit possible later and stops a single successful run from becoming an unsupported site-wide claim.

Pass Two: Record One Before-and-After Result

Run the baseline team once before swapping anything. Record the mode or map, the wave where the run first becomes unstable, the resource moment that matters, and the result. Then change one slot, keep the rest of the conditions fixed, and run it again. You do not need a universal damage calculator to make this useful; one visible outcome is enough for a narrow decision.

Roster problemBaseline noteOne controlled replacement testA decision you can safely make
The team leaks earlyFirst leak wave and the placement order used.Keep the starter sequence and change one candidate in the same timing window.Keep the change only if the same early section becomes more consistent.
A boss survives too longBoss/wave, upgrade state, and whether other conditions matched.Test one reported damage candidate at the same observed upgrade point.Prefer the candidate only when the repeat test improves the same boss problem.
Key upgrades arrive too lateResources immediately before the blocked upgrade.Try one economy-oriented option without changing the defensive core.Keep it only if it enables the needed upgrade without creating a new leak.
Targets escape a weak laneMap section and the pattern that causes the failure.Change one overlapping slot for a candidate that addresses coverage or control in the live run.Keep the swap when the former failure is repeatably reduced, not just when a number looks larger.

Take a screenshot of the version label or unit panel only when you can reproduce it yourself. Caption it with the route, date, and what is visible, and keep the official listing URL alongside it. Do not crop a community image or label generated artwork as gameplay evidence. The official experience artwork at the top of this page is intentionally captioned as identity/version evidence, not as proof of a tier placement.

When a Result Expires

Mark a personal test as needs recheck when the official Roblox experience changes its visible update label, the creator's official Roblox Community announces an update or balance-related change, or the game presents a new banner/system that changes the decision you were testing. Do not overwrite the dated October 10 snapshot to make it look current. Keep the source date, add the date of your new test, and state exactly what changed. That gives a returning player an honest answer: the editorial table remains a historical starting point, while the live roster decision must be repeated under the new conditions.

FAQ

What is the current Anime Mysterious tier list?

There is no verified official live tier list on the official Roblox listing checked October 16. The named S/A/B table here is a dated October 10 UPD0.5 editorial snapshot. Use it to pick a test candidate, then confirm the current server result.

Which units did the October 10 source place in S tier?

The source named Ryu, Yuto (Pure Love), Spood (Yen), Sukuno (Mohoraga), and Fammy. The placement is reported editorial evidence, not a developer promise that those five are best in every mode.

Should a beginner replace every B-tier unit?

No. First identify the run-stopping problem. A B-tier label does not tell you whether that unit is filling a useful job, whether you can afford its replacement, or whether the live version changed its value.

Where should I check for official update information?

Start with the official Roblox experience and the Community link it publishes. This page does not substitute an unverified Discord invite for that first-party route.

Why does this page not add every unit from other tables?

Different undated or conflicting tables are not evidence that all names share the same version, mode, or criteria. Adding them would make the list look current while making its provenance weaker.

How do I learn the method without seeing a second tier list?

Read how the Anime Mysterious tier list should be read. It explains the evidence and test process without publishing a rival ranking table.